Since the Zeagle RaZor is both a Regulator and a Valve, a means has to be provided to fill the cylinder that the RaZor is screwed into. Each RaZor comes with a filling adapter that provides either a connection point for a standard Scuba Valve Filling Whip (330-FA10-AA, shown above) or a connection to a standard tank valve (330-6050). A cap is unscrewed from the Filling Probe on the RaZor and the filling adapter is connected in its place. The RaZor comes equipped with a Burst Disc rated at 3000 PSI working pressure.
Note that the RaZor shown below is also equipped with the optional compact Submersible Pressure Gauge p/n 331-PG01-AA (screwed into the HP port), and an Over Pressure Relief Valve (p/n 330-4905), screwed into the LP port above the Hand-wheel. The Over Pressure Valve is set to release any intermediate pressure above 180 psi. It is an important safety addition to any regulator that is left turned on, but unused for long periods of time.
You can fill using air from another Scuba Tank with the Transfiller p/n 330-6050. The Transfiller is not recommended for RaZors mounted in tanks larger than 10 cu ft, because the weight of larger cylinders can damage the Transfiller during use.
Other products you may be interested in:
|
|
|
